HUAWEI FreeBuds Pro 3

HUAWEI FreeBuds Pro 3

Dimensions
Earphone dimensions:
29.1 mm (Height) × 21.8 mm (Width) × 23.7 mm (Depth)
Charging case dimensions:
46.9 mm (Height) × 65.9 mm (Width) × 24.5 mm (Depth)
Note: The actual size of the product may vary with the product configuration and manufacturing process.

Weight
Each earphone:
5.8 g ± 0.3 g
Charging case:
45.5 g ± 1 g
Note: The actual weight of the product may vary with the product configuration and manufacturing process.

Speaker
Dual Driver: 11 mm dynamic driver + planar diaphragm driver
Frequency response range: 14 Hz–48 kHz

Battery
Battery capacity
Earphones: 55 mAh (minimum value each)
Charging case: 510 mAh (minimum value)
Battery Life
Music playback (with noise canceling disabled): 6.5 hours after a full charge and 31 hours when used with the charging case.

Music playback (with noise canceling enabled): 4.5 hours after a full charge and 22 hours when used with the charging case.

Note: The battery life and charging data come from Huawei lab tests. During the tests, audio in AAC format was played at 50% volume level and with ANC disabled. The default settings were used for other features. Actual results may vary depending on the volume, audio source, environmental interference, product features, and usage habits.

Charging Method
Wired charging: USB-C
Wireless: up to 2 W
Charging Time
About 40 mins for the earbuds (in the charging case)
About 1 hour for the charging case without earbuds (wired)
About 150 mins for charging case without earbuds (wireless)
Note: Data comes from Huawei lab tests. During testing, the ambient temperature is 25°C, for reference only.
Standby time
The standby time is 270 days when the earphones are placed in the charging case and the cap is kept closed.
Note: Data comes from Huawei lab tests.

Microphone
3 silicon microphones
1 bone conduction microphones

Controls
Pinch once:
play/pause music, answer/end a call
Pinch twice:
play the next track
Pinch three times:
play the previous track
Long pinch:
enable or disable ANC/Awareness
Swipe up/down:
turn the volume up or down

Connectivity
Simultaneous Bluetooth connection with dual devices:
Supported
Pop-Up Pair:
Supported
Note: This feature requires Huawei phones running EMUI10 or later.

Sensor
Accelerometer/Infrared sensor/Hall sensor/Press sensor/Touch sensor/Bone sensor

Audio Technology
Digital cross-over/Triple Adaptive EQ/Active noise cancellation/Call noise cancellation/Transparency Mode

Splash, Water, and Dust Resistant
Earphones:
IP54
Charging case:
not waterproof
Note: IP54 dust- and water-resistance is only applicable to the earbuds themselves, not the charging case. This device is splash, dust, and water resistant in normal conditions. It was tested under controlled laboratory conditions and got an approved rating of IP54 under IEC standard 60529. Splash, dust, and water resistance are not permanent, and the performance may deteriorate due to daily wear-and-tear. Avoid charging the device in damp environments. Liquid damage is not covered under warranty.

Audio Format(s)
SBC, AAC, LDAC,L2HC2.0 are supported.LHDC and Apt-X are not supported.
Note: L2HC requires Huawei phones running EMUI 13.0 or later.